:Thiết bị phân tích đo lường
:Liên hệ
:024 3678 1666
Hãng sản xuất: Agilent Technology (Mỹ)
Model: HPLC 1260
Agilent 1260 Infinity Quaternary LC System - Selected System Specifications | |
Pump principle | Low pressure quaternary mixing, integrated high performance degassing unit |
Flow rate range | 0.05 - 5 mL/min at 600 bar 5 - 10 mL/min at 200 bar |
Maximum pressure | 600 bar |
Injection principle | Flow through design, no overfill (drawn = injected volume). Vial-only autosampler and vial and micro-titer plate autosampler available. |
Injection volumes | 0.1 - 100 µL, variable in 0.1 µL steps, higher injection volumes optionally available |
Column dimensions | Length: up to 300 mm, ID: 0.05 - 8 mm |
Temperature range | 10 °C below ambient - 80 °C With optional 1290 Infinity Thermostatted Column Compartment up to 100 °C |
Temperature stability | < ± 0.15 °C With optional 1290 Infinity Thermostatted Column Compartment < ± 0.05 °C |
Detection data rate | 80 Hz for UV, 74 Hz for fluorescence, 60 Hz for evaporative light scattering detection, higher data rates available with 1290 Infinity detectors |
UV noise level | As low as 0.6 uAU/cm (1260 Infinity DAD, 60 mm cell) |
Maintenance and system test | Front access to all maintenance parts Maintenance instructions through multimedia CD-ROM Time for full system test (OQ/PV) < 4 hours |
Standard GLP features | Early maintenance feedback-EMF (tracks lamp burn time, usage, number of injections with limits and feedback messages) |
Extended GLP features (for certain systems, refer to specifications of individual modules) |
Data Recovery Card (DRC) for data security (prevents data losses in case of communication breakdowns – depends on actually chosen detector) Radio Frequency Identification (RFID) for data traceability. (RFID tags for flow cells and UV lamp allow unambiguous traceability of measurement conditions) |
System control | Through local workstation software, client/server network data system and/or local handheld control module (1200 Infinity Series Instant Pilot). Default control: LAN / CAN. |